Custom items in Labor Factors

tips for tailoring The Assistant Estimating System for your company's use
Post Reply
Hank H
contributor
Posts: 14
Joined: Fri Oct 31, 2008 10:18 am
Location: Dallas, TX

Custom items in Labor Factors

Post by Hank H » Wed Jan 14, 2009 7:25 pm

In the Labor Factor tab I see 5 columns labled "custom cab 1", "custom door 1 & 2" and "custom drawer 1 & 2". Do the labor rates in these columns come into play with the casework spec's? If so, how?

Thanks, Hank

User avatar
John Whitling
All knowing
Posts: 91
Joined: Tue Dec 04, 2007 6:14 pm

Post by John Whitling » Wed Jan 14, 2009 11:09 pm

Hi Hank
Those are slots reserved for customization, if needed. At this point they are not used and do not co-ordinate with any cabinet process.

You see, in our first estimating system we occasionally had to perform customizations for clients. When we designed Gen 2 system we added these entries in anticipation of needing entries for customization .. as it turns out though, Gen 2 has been pretty detailed and so we haven't had to ever use them. I'm sure some day we will. For now don't worry about them.

Also a little tip .. the column headers in the labor factors give a little description as to their use and meaning when you "mouse over" them. Anytime you see a little red triangle mouse over it to read add'l detail.

Post Reply